1
FEP-0531
User Manual
Brief introduction
Many thanks for purchasing Fast Ethernet POE Switch! This
product supports IEEE802.3U/100Base-Tx protocol, as well
as full duplex and half duplex mode. It provides 4 TX ports
and a UPLINK port, which can suit for most 10/100M
networks. This manual is for 100M converters.
Model
Specifications
5 x UTP
10/100M adaptive, with 4 PSE port
Packing list
Please check the following items in the package before
installing the converter.
Fast Ethernet POE Switch
1 piece
AC/DC adapter
1 piece
User manual
1 copy
Warranty card
1 piece
Please contact the dealer immediately for any missing or
damaged items.
Interface
1. Interface
All RJ-45 copper interfaces support Auto-Negotiation for
optimal speed detection through RJ-45 CAT5 UTP cables
with a maximum length of 100 meters (or 328 feet). They
also support standard Auto-MDI/MDI-X that can detect the
type of connection to any Ethernet device without requiring
special straight or crossover cables.
2. Connection
All ports support 802.3af compliant Power Devices (PD) and
other network devices (e.g. work station, hub or switch).
Connect one end of the standard UTP CAT5 network cable
to the 10/100Mbps RJ-45 ports on the front panel of the
switch. Connect the other of the cable to the typical network
devices.
Fig.1 Basic Network Connection
Panel
1.
Front
2. Back
Explanation for LED indicator lamp
The LED indicator lamps serve as device monitoring and
error display. The following explains each LED indicator.
LED
Status
Explanation
PWR
Green
Lit when Power is available.
POE
(P1~P4)
Yellow
Lit when the connected port(s) is/are PSE
starts to supply power
OFF
Off when the connected port(s) is/are PSE
stop power supply
L/A
(P1~P4)
Green
Lit when there is/are network device(s)
connect the corresponding port(s)
Blink
Blink when the corresponding ports
is(are) transmitting data flows
Two
bits DIP
switch
Standard
Support 100 meters standard distance
transmission
Extend
Support 250 meters long distance
transmission
VLAN
Support 100M downlink port isolation,
only uplink port communication
VLAN
&Extend
Support 10M Port isolation and 250
meters long distance transmission
