User Manual of Network Camera
69
6.
Click
Save
to save the settings.
6.4.4
Display Information on Stream
Check the checkbox of
Enable Dual-VCA
, and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. And then you can set rules
on the connected rear-end device to detect the events including line crossing, intrusion,
etc.
Figure 6-30
Display Info. on Stream
6.4.5
Configuring Target Cropping
Purpose:
You can specify a target area on the live video, and then it can be displayed via the
third stream in some certain resolution, thus providing more details of the target area
if needed.
Note:
Target cropping function varies according to different camera models.
Steps:
1.
Enter the Target Cropping settings interface:
Configuration> Advanced Configuration> Video/Audio> Target Cropping
.
2.
Check the checkbox of
Enable Target Cropping
to enable the function.
3.
Set Third Stream as the stream type.
4.
Select the cropping resolution for the video display of target area. A red rectangle
is displayed on the live video to mark the target area, and you can click-and-drag
the rectangle to locate the target area as desired.
5.
Click
Save
to save the settings. You can go to the Live View page and click the
Содержание 57107207
