Level Pro ITC 450, Руководство пользователя

Страница: 46 / 59

Calculated Iout do not exceeds the output working range (3.8 - 21 mA).
b) D = „20.5”
According to formula from page 34:
I
out
= (20.5-10.0) / (20.0-10.0) × 16 mA + 4 mA = 1.05 ·16 + 4 = 20.08 mA
Calculated Iout do not exceeds the output working range (3.8 - 21 mA).
c) D = „30.0”
According to formula from page 34:
I
out
= (30.0-10.0) / (20.0-10.0) × 16 mA + 4 mA = 2 ·16 + 4 = 36 mA.
Calculated Iout exceeds the output working range (3 - 21 mA), so current output will generate
current equal to the upper border of range defined by parameter “Lo r” i “Hi r” (it means 21 mA).
Transmission parameters : 1 start bit, 8 data bits, 1 or 2 stop bit (2 bits are send, 1 and 2 bits are accepted
when receive), no parity control
Baud rate : selectable from: 1200 to 115200 bits/second
Transmission protocol : MODBUS RTU compatible
The device parameters and display value are available via RS-485 interface, as HOLDINGtype registers
(numeric values are given in U2 code) of Modbus RTU protocol. The registers (or groups of the registers) can
be read by 03h function, and wrote by 06h (single registers) or 10h (group of the registers) accordingly to
Modbus RTU specification. Maximum group size for 03h and 10h functions can not exceeds 16 registers (for
single frame).
11. THE MODBUS PRO TOCOL HANDLING
The device interprets the broadcast messages, but then do not sends the answers.
44
www. levelprosales.com
ITC 450/470
User manual