Configuration control
Leuze electronic
DCR 50
52
Code Description
Command Format Op-
tions
De-
fault
Notes/Examples
RDCMXPL
Reader Command to set a
platform configuration
“<Configuration>”
Quoted string containing the Configuration Con-
trol Command. The configuration will be saved
and restored on reboot/restart. Enclose the com-
mand in square brackets (inside the quotes) and
add a carret between the opening square bracket
and command to delete a command from the
platform configuration
Save Example:
RDCMXPL"FBGRPBI1"
Delete Example:
RDCMXPL"[^FBGRPBI1]"
Get All Reader Licenses
RD LC
G
GL
Returns all Reader License values in an
XML element.
Example
: RDLCGGL
Load License
RD LC
X
LD
“URL
en-
coded
license
string”
Loads license on the reader
Copies the contents of the License CRB
file starting after the ‘?’character to use
as the URL encoded license string. This
string must be in quotes in the com-
mand.
Example
: RDLCXLD”%23%45….”
Delete License
RD LC
X
DL
Li-
cense
num-
ber
Deletes a license
License number is an integer that repre-
sents just the license number, not the
serial number of the license you want to
delete.
Example
: RDLCXDL5000
8.2.8
Reader configuration
Code Description
Command Format Op-
tions
De-
fault
Notes/Examples
Get All Reader Parameters
CF
G
Returns all Reader Parameter values in
an XML element.
Example: CFG
Reset Reader to Factory
Default
CF
R
Resets all reader parameters to factory
default values.
Example: CFR
8.2.9
General firmware operation
Code Description
Command Format Op-
tions
De-
fault
Notes/Examples
Get All Firmware Parame-
ters
FW FW
G
Returns all Firmware parameter values
in an XML element.
Example
: FWFWG