Leuze DCR 258i Скачать руководство пользователя страница 13

Страница: 13 / 123

Device description

Leuze electronic GmbH + Co. KG

DCR 258i

3.3

Connection technology

The device is connected using variously coded M12 connectors:

• A-coded, 12-pin, M12 connection for operating voltage, switching inputs/outputs, RS 232/RS 422 inter-

face

• D-coded, 4-pin, M12 connection for the Ethernet connection

PWR / SWIO

HOST

PWR / SWIO, M12 plug, 12-pin, A-coded

HOST, M12 socket, 4-pin, D-coded

Fig. 3.2:

Electrical connections

NOTICE

Ready-made cables are available for all connections (see chapter 16.4 "Cables accessories").

NOTICE

Shielding connection!

The shielding is connected via the M12 connector housing.

3.4

Indicators and operational controls

NOTICE

Devices with stainless steel housing do not have any control buttons.

Devices with stainless steel housing do not have a bar graph indicator.

The device is equipped with the following indicators and operational controls:

• Feedback LED

The green feedback LED indicates whether a read process was successful. This function is activated
upon shipment of the device from the factory and can be deactivated via the webConfig tool.

Upon successful decoding, the feedback LED illuminates briefly (GOOD READ, MATCH).

• Three indicator LEDs (PWR, NET, LINK)

• Six-level bar graph display for function selection and display of the reading quality (SIGNAL QUALITY)

– not with devices with stainless steel housing

• Two control buttons – not on devices with stainless steel housing

Содержание DCR 258i




























































































































Результаты поиска

Содержание DCR 258i

Отзывы:

Бренды по названию

Популярные бренды

Leuze DCR 258i, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание DCR 258i

Отзывы:

Бренды по названию

Популярные бренды