General
Leuze electronic GmbH + Co. KG
LCAM 308
4
1
General
This manual describes the installation and operation of the device LCAM 308, hereinafter only referred to
as camera, so that its use complies with relevant requirements, particularly regarding safety and electro
-
magnetic compatibility when used as intended.
It is therefore essential to read this manual completely and carefully before installing and operating the
camera.
Furthermore, it must be ensured that this manual is available to the end users of the camera for the
complete period of use. This manual may also have to be handed over together with the camera. Any addi
-
tions or changes provided by the manufacturer must be incorporated into the operating manual without
delay.
1.1
Manufacturer of the camera
Leuze electronic GmbH+Co. KG
In der Braike 1
73277 Owen
Tel.: +49 7021 – 573 - 0
Fax: +49 7021 – 573 - 199
E-Mail: [email protected]
1.2
Free and Open Source Software (FOSS)
Some parts of the software are licensed under the GNU General Public License or other Open Source and
Free Software licenses. The corresponding list can be found in the download section of this product.
Source code is available on request. Shipping and handling fees may apply.
1.3
Meaning of the symbols
1.4
Intended Use
The camera is intended for use in industrial applications, whereby the camera is supplied with direct
current via a normal direct voltage power supply unit and not via a direct current network.
The camera is used for live streaming and internal recording, in general, for event-based storage of image
and video snapshots. The recording can be triggered by the digital input (hardware) or the network inter
-
face (software).
An integrated passive NFC tag is used to read information from the camera, such as serial number or soft
-
ware version, wirelessly via the corresponding NFC interface.
To reduce the risk of condensation inside the camera, a heater can be switched on if required. A mounting
socket is used for mounting and fastening for adaptation.
The camera may only be used and operated in accordance with the specifications given under „Technical
Data“. Furthermore, the instructions for „Mounting and connecting“ must be observed.
The camera is only intended for use with the pre-installed software or with updated versions provided by
Leuze.
CAUTION
Instructions and information for reliable use of the camera, especially regarding safety and elec
-
tromagnetic compatibility, are marked with this symbol and must be followed to ensure reliable
use.
NOTICE
This symbol indicates information and tips that may be helpful, especially regarding using the
individual camera functions.
