Leuze 50147807 страница 18 Скачать руководство пользователя

Страница: 18 / 26

User Interface

Leuze electronic GmbH + Co. KG

LCAM 308

Figure 6.2: Events
A click on the thumbnail plays the recording. Below are three buttons:

• Download Video

Starts the download of the video

• Download Snapshot

Download still image taken at the trigger time

• Delete

Deletes the video after a confirmation

6.3

Settings

All camera settings are stored on the SD card in the file ipcam_settings.json. If this file does not exist or is

invalid due to incorrect manual editing, the default settings are loaded and a message is displayed at the

top of the settings page.
By saving the settings on the settings page, the file ipcam_settings.json is created or overwritten.
To reset the camera to factory defaults, this file can be deleted from the SD card. This is only necessary

if the password of the admin user has been forgotten. Otherwise all settings can be edited through the user

interface.
By clicking the Backup/Restore button, you can either download the settings file or restore the settings

from a previously backed up file. The backup file should not be edited manually.

1. Snapshots are taken with Live stream resolution

Содержание 50147807



























Результаты поиска

Содержание 50147807

Отзывы:

Похожие инструкции для 50147807

Бренды по названию

Популярные бренды

Leuze 50147807, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание 50147807

Отзывы:

Похожие инструкции для 50147807

Бренды по названию

Популярные бренды