Leuze 50117911, Оригинальная инструкция по эксплуатации

Страница: 151 / 231

Starting up the device - RS 485 Modbus interface
Leuze electronic GmbH + Co. KG CML 730i 151
General configurations (group 4)
Extended settings (group 5)
Transmitter part number 42 20-byte string with
the part number
of the transmitter
string
20 byt
es
RO Transmitter order number (8-digit)
Transmitter serial num
-
ber
43 16-byte string with
the transmitter
serial number
string
16 byt
es
RO Transmitter serial number for unique product iden
-
tification
Device description 44 10-byte string with
the device
description
string
10 byt
es
RO The device characteristics specify the beam spac
-
ing, the number of physical/logical individual
beams, the number of cascades (16 individual
beams) in the device and the cycle time.
Parameter Index
(hex.)
Response Data
type
Access Value
range
Default Explanation
Configured under group 4 “General configurations” are the type of scanning (parallel-/diagonal-
/crossed-beam), counting direction and the minimum object diameter for the evaluation (smooth
-
ing). The minimum hole size for the evaluation, e.g., with web material, is configured via inverted
smoothing.
Parameter Index
(hex.)
Response Data
type
Access Value
range
Default Explanation
General settings 47 4 bytes with the
general settings
RW
Beam mode 47 t08U RW 0 … 3 0 Beam mode
0: Parallel-beam scanning
1: Diagonal-beam scanning
2: Crossed-beam scanning
3: Beam matrix
Counting direction 47 t08U RW 0 … 1 0 Counting direction
0: Normal – starting with the connection piece
1: Inverted – ending with the connection piece
Smoothing 47 t08U RW 1 … 255 1 Smoothing:
Less than i interrupted beams are ignored.
InvertedSmoothing 47 t08U RW 1 … 255 1 Inverted smoothing:
Less than i free beams are ignored.
The extended settings specify the autoteach function, filter depth (with respect to the number of
interrupted beams as switching trigger) and integration time (hold function).
Parameter Index
(hex.)
Response Data
type
Access Value
range
Default Explanation
Extended settings 4A 4 bytes with the
extended settings
RW
Autoteach 4A t08U RW 0 … 1 0 0: Not active
1: Active
Filter depth 4A t08U RW 0 … 255 1 The filter depth indicates the necessary number of
consistent beam states before the evaluation of
the measurement values. The filter depth corre
-
sponds to the number of passes with interrupted
beam so that the result leads to switching.
Integration time 4A t16U RW 0 … 6553
5
0 All measurement values are accumulated and
retained over the duration of the integration time.
Hold function in ms