Description ODSL 30
Leuze electronic GmbH + Co. KG
ODSL 30
10
3
Description ODSL 30
3.1
General description
The ODSL 30 is a laser distance sensor with an extensive range of applications. The devices are available
in different versions with analog outputs, digital outputs, or switching outputs. The distance measurement
uses the phase measurement principle. The measurement range
1)
lies between 0.2…30m. The device
models with serial output allow a measurement range up to 65 m.
Integrated in the device are a membrane keyboard and a two-line LC display which can be used to
configure the ODSL 30. During measurement operation, the display shows the current measurement
value. The switching point of the switching outputs can easily be set via a teach input on all variants.
By carrying out the integrated referencing function before a measurement, the sensor's accuracy can be
improved. To achieve this, the active input (PIN 2) can be configured via the menu to act either as an ac
-
tivation input with referencing, or as a pure referencing input. While the referencing function is carried out
(duration about 0.3s), no measurement can be taken.
If the device is used in areas subject to electrostatic charges, it is recommended to connect the housing
of the ODSL 30 to a potential equalization.
Accessories
The mounting device BT 30 is already included in the scope of delivery of the ODSL 30 for easy mounting
and alignment (for further accessories, see see chapter 5.2).
1) Diffuse reflectance 6 … 90% throughout the entire temperature range, measurement object
≥
50 x 50mm
2
.
ODSL 30/D…: Measurement range up to 65m, diffuse reflectance 50 … 90%
NOTE
Moving objects into the measurement beam from the side may lead to incorrect measurement
values.
