Leuze 50037188, Оригинальная инструкция по эксплуатации

Страница: 7 / 35

Safety
Leuze electronic GmbH + Co. KG BPS 37 5
2 Safety
The bar code positioning systems of the BPS 37 series, the MS 37 103 modular connector hoods and the
optional MA 4.7/MA 4D.7 connection units have been developed, produced and tested subject to the appli
-
cable safety standards. They correspond to the state of the art.
2.1 Intended use
Bar code positioning systems of the BPS 37 series are optical measuring systems which use visible red
laser light to determine the position of the BPS relative to a permanently mounted bar code tape.
The modular connector hood MS 37 103 is intended for the easy connection of bar code positioning
systems of type BPS 37 with M12 connection technology.
The modular service display MSD 1 101, which is optionally available, displays operational data of the
BPS 37 and is used as a simple means of access to the service interface of the MS 37 103.
Areas of application
The BPS 34 bar code positioning systems are designed for the following areas of application:
• High-bay storage devices: Positioning in the travel and lifting axes
• Crane bridges and trolleys
• Side-tracking skates
• Electrical monorail systems
• Elevators
2.2 Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that use is considered
improper use.
CAUTION
Use only approved bar code tapes!
The bar code tapes approved by Leuze and listed as accessories are an essential part of the
measurement system.
Bar code tapes not approved by Leuze are not allowed.
The use of such bar code tapes is contrary to the intended use.
CAUTION
Observe intended use!

Only operate the device in accordance with its intended use. The protection of personnel and
the device cannot be guaranteed if the device is operated in a manner not complying with its
intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.
Read the technical description before commissioning the device. Knowledge of this technical
description is an element of proper use.
NOTE
Comply with conditions and regulations!

Observe the locally applicable legal regulations and the rules of the employer's liability insur
-
ance association.
ATTENTION!
For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC
(National Electric Code).