General information
Leuze electronic GmbH + Co. KG
BPS 37
4
1
General information
1.1
Explanation of symbols
The symbols used in this technical description are explained below.
1.2
Declaration of Conformity
The bar code positioning system BPS 37, the modular connector hood MS 37 103, and the optional
connection units MA 4.7/MA 4D.7 have been developed and manufactured in accordance with the appli
-
cable European standards and directives.
The devices of the BPS 37 series without integrated heating also fulfill the cUL requirements (Underwriters
Laboratory Inc.) for the USA and Canada.
The manufacturer of the product, Leuze electronic GmbH & Co. KG in D-73277 Owen, possesses a certi
-
fied quality assurance system in accordance with ISO 9001.
ATTENTION!
This symbol precedes text messages which must strictly be observed. Failure to observe the
provided instructions could lead to personal injury or damage to equipment.
ATTENTION LASER!
This symbol warns of possible danger caused by hazardous laser radiation.
NOTE
This symbol indicates text passages containing important information.
NOTE
The corresponding declaration of conformity can be requested from the manufacturer
