Description
Leuze electronic GmbH + Co. KG
BPS 37
9
3.5
Stand-alone operation
The bar code positioning system BPS 37 is operated as individual "stand alone" device. The BPS features
a 15-pin sub-D connector for the electrical connection of the supply voltage, the interface and the switching
inputs.
With connection units
The connection units simplify the electrical installation of the bar code positioning systems in stand-alone
operation.
Moreover, they store the operating parameters so that the configuration data are retained even if the BPS
is replaced and can show parameters and operating data on a display (MA 4D.7).
A listing of the available connection units and associated short descriptions can be found in Chapter 5.
Separate data sheets are available that contain further details about the connection units.
With MS 37 103 connector hood
The modular connector hood MS 37 103 is intended for the easy connection of the BPS 37 with M12
connection technology.
Without connection unit/connector hood
Figure 3.2: Connection BPS "Stand alone"
With MA 4.7/MA4D.7 connection unit
Figure 3.3: BPS connection with MA 4.7 connection unit
Voltage supply
10 … 30 V DC
SI
SO
SSI
15 pin sub-D
connector,
socket
version
BPS 37
MA 4.7/MA 4D.7
SO
SI
Power
SSI
SSI
Interconnection
cable KB031-3000