Leuze electronic TMC 66 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 51

Leuze electronic TMC 66 Скачать руководство пользователя страница 11

Safety

Leuze electronic

TMC 66

11

T

N

T

35/

7-

24V

DEUTSCH

ENGLISH

FRANÇAIS

IT

ALIANO

ESPAÑO

L

NEDERLANDS

The manufacturer of the machine is responsible for:

• safe machine construction
• safe implementation of the Test Monitoring Unit
• imparting all relevant information to the operating company
• adhering to all regulations and directives for the safe starting-up of the machine

The company operating the machine is responsible for:

• instructing the operating personnel
• maintaining the safe operation of the machine
• adhering to all regulations and directives for occupational safety and safety at work
• regular testing by competent personnel

2.4

Exemption of liability

Leuze electronic GmbH + Co. KG is not liable in the following cases:
• Test Monitoring Unit is not used as intended
• safety notices are not adhered to
• reasonably foreseeable misuse is not taken into account
• mounting and electrical connection are not properly performed
• proper function is not tested
• changes are made to the Test Monitoring Unit

2.5

Fields of Application

The test monitoring unit TMC 66 may be used as isolating protective device for safeguar-
ding of hazardous areas on power driven machines.
The following areas of application are thus possible (excerpt):

• Edge, frame, star and carcass press in lumber industry acc. to prEN 691 resp. ZH 1/3.19
• Printing and paper processing machines acc. to prEN 1010
• Power driven windows, doors and portals acc. to ZH 1/494
• Storage equipment and devices acc. to ZH 1/482 and DIN 15185 part 2
• Textile machines acc. to VBG and DIN EN ISO 11 111
• Food processing equipment acc. to prEN 1672-1 resp. VBG 77
• Packaging machinery acc. to prEN 415-1 to -7 resp. VBG 76
• Meat processing equipment acc. to prEN 12463 resp. VBG 79
• Machines of the chemical, rubber and plastic industry acc. to VBG 22

2.6

Organizing Measures

Mounting, commissioning and maintenance of the device must only be carried out by
qualified personnel. Electrical work must be carried out by a certified electrician.

Adjustment and change of the protective field for the protection of persons may only be
carried out by an authorized person.

«
...
9
10
11
12
13
...
»

Содержание TMC 66




















































Отзывы:

Нет отзывов