Leuze electronic LSIS 472i M45-I1, Руководство по эксплуатации

Страница: 32 / 55

Extended configuration – Leuze electronic webConfig tool
Leuze electronic LSIS 472i 32
9.3.3 Selecting the check program
There is a check program stored on the device for the detection of both the
Rack Near
and
Rack Far
hole
positions.

Select
CONFIGURATION > PROGRAMS
.
The
Overview of Check Programs
dialog is displayed.
Figure 9.3:
Overview of Check Programs

Select the check program that you would like to activate (
Rack Near
or
Rack Far
).
Table 9.1: Overview of digital inputs for check programs
9.3.4 Configure compartment fine positioning
To commission more quickly, you can set the most important parameters for the check programs (
Rack
Near
and
Rack Far
) via a configuration dialog.
Alternatively, you can make the configuration settings for compartment fine positioning manually; see
chapter 9.3.6.
NOTICE
Configuration changes only in the
Service
operating mode!

Changes made using the
CONFIGURATION
function can only be performed in the
Service
operating
mode.
Digital input IO2 Digital input IO3 Selection ID Check program
0 0 0
Rack Near
1 0 1
Rack Far
0 1 2 Not defined
1 1 3 Not defined
The configuration for compartment fine positioning for faster commissioning is only available if
the device is directly connected to the PC/laptop.