Display and control panel
Leuze electronic
LSIS 4xx
i
46
TNT
35/7-2
4
V
7.3.4
Parameter menu
Parameter handling
The
Parameter handling
submenu is used to lock and release the parameter input via the
display and for resetting to default values.
Display settings
In the
Display settings
submenu, the complete display can be turned upside down,
meaning turned by 180°, via the
Turn by 180˚
menu item to enable good display readability
at the mounting site, if necessary.
Program selection
In the
Program selection
submenu, a scrollbar can be used to activate any of the check
programs stored on the LSIS 4xx
i
.
A selected program is immediately activated by pressing the enter button. If, however, a test
cycle is currently being executed at this moment, this test cycle is executed to completion
and evaluated.
As the new check program is being activated, the green "PWR" LED flashes.
Parameter
Parameter handling
Display settings
Program selection
Ethernet
Parameter - main menu
Editing Ethernet addressing and selecting check programs stored on the
LSIS 4xx
i
.
Level 3
Level 4
Selection/configuration option
Description
Standard
Parameter enable
OFF/ON
The standard setting (
OFF
) prevents unintended
parameter changes.
If parameter enabling is activated (
ON
), parameters can be
changed manually.
OFF
Default parameters
By pressing the enter button
after selecting
Parameters to default
, all parameters are reset to
their standard settings without any further security
prompts.
In this case, English is selected as the display language.
Table 7.1:
Parameter handling submenu
Level 3
Level 4
Selection/configuration option
Description
Standard
Program name 1
Here, you will find check programs previously set in
webConfig.
Program name 2
Program name 3
…
Table 7.2:
Program selection submenu
