Appendix
Leuze electronic
IPS 208i
73
ASCII
Dec.
Hex.
Oct.
Designation
Meaning
v
118
76
166
v
Lower case letter
w
119
77
167
w
Lower case letter
x
120
78
170
x
Lower case letter
y
121
79
171
y
Lower case letter
z
122
7A
172
z
Lower case letter
{
123
7B
173
OPENING BRACE
Opening brace
|
124
7C
174
VERTICAL LINE
Vertical line
}
125
7D
175
CLOSING BRACE
Closing brace
~
126
7E
176
TILDE
Tilde
DEL
127
7F
177
DELETE (RUBOUT)
Delete
17.2
Configuration via configuration codes
The positioning sensor can also be configured using configuration codes. The device parameters in the de-
vice are set and permanently saved after reading this code.
Configuration changes via the configuration codes are only possible via button activation on the control
panel of the sensor (
AUTO
function).
Proceed as follows to read in a configuration code:
Ä
Connect the sensor to the operating voltage and activate the
AUTO
function on the control panel.
Ä
Hold the printed configuration code at the correct distance in front of the optics of the sensor.
NOTICE
Read in configuration codes individually!
The printed configuration codes can only be read in individually.
NOTICE
Configuration codes cannot be read via the
DCR configurator
app.
Reset to factory settings (without IP address)
Fig. 17.1:
Configuration code: reset to factory settings
Setting the IP address to the Leuze default address
Fig. 17.2:
Configuration code: Setting the IP address