Leuze electronic DCR 248i страница 8 Скачать руководство пользователя

Страница: 8 / 115

Safety

Leuze electronic

DCR 248i

Safety

This code reader was developed, manufactured and tested in accordance with the applicable safety stan-
dards. It corresponds to the state of the art.

2.1

Intended use

The code readers of the DCR 200i series are camera-based code readers for all commonly used bar
codes, stacked codes and DataMatrix codes as well as for codes of the GS1 DataBar family.

Areas of application

The code readers of the DCR 200i series are especially designed for the following areas of application:

• Packaging systems

• Mounting/handling technology

• Analysis technology

CAUTION

Observe intended use!

The protection of personnel and the device cannot be guaranteed if the device is operated in a
manner not complying with its intended use.

Only operate the device in accordance with its intended use.

Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.

Read these operating instructions before commissioning the device. Knowledge of the oper-
ating instructions is an element of proper use.

NOTICE

Integrated illumination!

The code readers of the DCR 200i series correspond to the following classification with respect
to the integrated illumination:

Illumination

red

: risk group 0 (exempt group) in acc. with EN 62471

NOTICE

Comply with conditions and regulations!

Observe the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.

2.2

Foreseeable misuse

Any use other than that defined under "Intended use" or which goes beyond that use is considered im-
proper use.

In particular, use of the device is not permitted in the following cases:

• in rooms with explosive atmospheres

• in circuits which are relevant to safety

• In food processing

• for medical purposes

NOTICE

Do not modify or otherwise interfere with the device!

Do not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in any way.

The device may only be opened for exchanging the housing hood.

There are no user-serviceable parts inside the device.

Repairs must only be performed by Leuze electronic GmbH + Co. KG.

Содержание DCR 248i




















































































































Результаты поиска

Содержание DCR 248i

Отзывы:

Похожие инструкции для DCR 248i

Бренды по названию

Популярные бренды

Leuze electronic DCR 248i, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание DCR 248i

Отзывы:

Похожие инструкции для DCR 248i

Бренды по названию

Популярные бренды