PROFINET
Leuze electronic
DCR 248i
74
Output data
Address
Data type
Value range
Default
Unit
Explanation
New entry
0.5
Bit
0 -> 1: New entry
1 -> 0: New entry
0
---
The toggle bit shows
whether new entry data
is present
Reserved
0.6
Bit
0
---
Free
0.7
Bit
0
---
Free
Entry data
length
1
UN-
SIGNED16
0-65535
0
---
Data length of the ac-
tual information.
Data
3..18
16x
UN-
SIGNED8
0-FFh
0
---
Information with a
length of consistently
16 bytes.
Output data length: 3 bytes consis 16 bytes of result information
10.4.15 Module 103 – Entry data 3
PROFINET-IO module identifier
• Module ID: 1103
• Submodule ID: 1
NOTICE
Ä
Data reset does
not
affect the output data toggle bits
Ä
If fragmentation is used, the application must set the output data of the entry data fragmen-
tation module for each fragment that is to be transmitted before the toggle bit is toggled in
the entry data module (see chapter 10.4.4 "Module 16 – Fragmented entry").
Description
The module defines the transfer of entry data to a command interpreter (Cmd interpreter) in the device.
Tab. 10.20:
Input data structure module 103
Input data
Address
Data type
Value range
Default
Unit
Explanation
Data accep-
tance toggle
bit
0.0
Bit
0->1: Data have
been accepted
1->0: Data have
been accepted
0
---
The signal shows that
the device has ac-
cepted the data or the
data fragment.
Data rejec-
tion toggle bit
0.1
Bit
0->1: Data have
NOT been ac-
cepted
1->0: Data have
NOT been ac-
cepted
0
---
The device has re-
jected the acceptance
of the data or the data
fragment.
Reserved
0.2
Bit
0
---
Free
0.3
Bit
0
---
Free
