Leuze electronic DCR 248i Скачать руководство пользователя | Manualshive

Страница: 49 / 115

background image

Commissioning – Leuze electronic webConfig tool

Leuze electronic

DCR 248i

49

9

Commissioning – Leuze electronic webConfig tool

The code readers of the DCR 200i series can be operated and configured via the Ethernet service interface
with the integrated Leuze electronic webConfig tool.

With the webConfig tool, an operating-system independent, web-technology based, graphical user interface
is available for configuring code readers.

Through the use of HTTP as communication protocol and the client-side restriction to standard technolo-
gies (HTML, JavaScript and AJAX), which are supported by all of today's popular, modern browsers, it is
possible to operate the webConfig tool on any Internet-enabled PC.

NOTICE

The webConfig tool is offered in the following languages:
German, English, French, Italian, Spanish, Chinese, Korean

9.1

System requirements

To use the webConfig tool, you need a PC or laptop with the following specifications:

Tab. 9.1:

System requirements for the webConfig tool

Monitor

Min. resolution: 1280 x 800 pixels or higher

Internet browser

Internet Explorer version 9.0 or higher

Firefox version 30 or higher

Chrome version 40 or higher

NOTICE

Ä

Regularly update the operating system and the Internet browser.

Ä

Install the current Windows Service Packs.

9.2

Start webConfig tool

ü

Prerequisite: IP address and subnet mask for the LAN connection with the device are set correctly.

Ä

Connect the operating voltage to the device.

Ä

Connect the HOST interface of the device to the PC. The connection to the HOST interface of the de-
vice is made via the LAN port of the PC.

Ä

Start the webConfig tool via your PC's Internet browser with IP address

192.168.60.101

or with the IP

address set by you.

ð

192.168.60.101

is the standard Leuze electronic IP address for communication with code readers

of the DCR 200i series.

The PC displays the webConfig start page with the current process information in the

Process

operating

mode:

• Current image of the code reader

• Current decoding result

• Brief history of the last decoding operations

• States of the switching inputs/outputs

• Statistics counter

NOTICE

The process information may be displayed with a time delay depending on the current process-
ing speed.

«
...
47
48
49
50
51
...
»

Содержание DCR 248i




















































































































Отзывы:

Нет отзывов

Похожие инструкции для DCR 248i

Бренд: Panasonic Страницы: 118

CQRX400U - AUTO RADIO/CD/MP3 DECK

Бренд: Panasonic Страницы: 18

CQRX400U - AUTO RADIO/CD/MP3 DECK

Бренд: Panasonic Страницы: 24

Бренд: Rock Mars Страницы: 18

Бренд: Dual Страницы: 38

Бренд: ICT Страницы: 38

Ultra Contact Label

Бренд: PakSense Страницы: 23

Бренд: Clas Ohlson Страницы: 4

Бренд: Titan Electronics Страницы: 22

Бренд: König Electronic Страницы: 48

Бренд: Phonocar Страницы: 16

Бренд: Phonocar Страницы: 16

Бренд: Kobil Страницы: 3

Бренд: Boss Snowplow Страницы: 32

Бренд: Hama Страницы: 24

Бренд: Sony Страницы: 2

CDX-H910UI Marketing Specifications (CDXH910UI)

Бренд: Sony Страницы: 2

CDX-L510X - Fm/am Compact Disc Player

Бренд: Sony Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды