Leuze electronic DCR 202i, Оригинальная инструкция по эксплуатации

Страница: 53 / 76

Interfaces – Communication
Leuze electronic DCR 202i 53
10.1.3 Online commands for system control
Activate decoding
Deactivate decoding
10.2 XML-based communication
You can send commands for control and configuration directly to the code reader via XML-based commu
-
nication.
• The code reader must be connected to a computer (host) via the Ethernet interface (see
chapter 8.3.4 "Ethernet host communication").
• The code reader is designed as an XML server and communicates on port 10004.
Acknowledgment SST=xxxxxxxx
x stands for a single bit (value 1 or 0 )
Bit 7 is at the far left, bit 0 is at the far right
0 Ready for testing
1 The code reader is ready to receive a trigger and start a check pro
-
gram.
0 The code reader does not respond to an incoming trigger signal.
1 Operating mode
1
Process
operating mode
0
Service
operating mode
2 Device error
1 Device error, no inspection possible
0 No device error, ready
3 … 7 No function, value is always 0
Alternatively, the following acknowledgment is output:
DS=xx
x Error acknowledgment
00 Syntax error
01 Other error
Command SST?
Command +
Description The command activates configured decoding.
Parameter None
Acknowledgment None
Command -
Description The command deactivates configured decoding.
Parameter None
Acknowledgment None