Commissioning – Leuze electronic webConfig tool
Leuze electronic
DCR 202i
45
• The configuration cannot be changed.
•
Service
• Process communication to the control or to the PC has been interrupted.
• The switching inputs/outputs are deactivated.
• The configuration can be changed.
Located in the upper left of all pages of the webConfig tool is a software switch for changing the operating
mode (
Process
-
Service
).
After changing to the
Service
operating mode, the CONFIGURATION menu is displayed.
Changing the operating mode (
Process
-
Service
) (upper left)
Figure 9.2: CONFIGURATION menu of the webConfig tool
9.3.2 Menu options of the webConfig tool
The webConfig tool offers the following menu functions:
• PROCESS
• Information on the current read result
• Current camera image
• Status of the switching inputs/outputs
• Reading statistics
• CONFIGURATION
• Configuration of the decoding
• Configuration of the data formatting and data output
• Configuration of the switching inputs/outputs
• Setting the communication parameters and interfaces
• DIAGNOSIS
• Event logging of warnings and errors
• MAINTENANCE
Firmware update
NOTICE
Configuration changes only in the
Service
operating mode!
Changes made using the
CONFIGURATION
function can only be performed in the
Service
operating
mode.
