Commissioning – Leuze electronic webConfig tool
Leuze electronic
DCR 202i
44
Changing the operating mode (
Process
-
Service
) (upper left)
Figure 9.1: The start page of the webConfig tool
The user interface of the webConfig tool is largely self-explanatory.
Clearing browser history
The cache of the Internet browser is to be cleared if different device types or devices with different firmware
were connected to the webConfig tool.
Delete cookies and temporary Internet and website data from browser history before starting the
webConfig tool.
Example for Internet Explorer 10:
Settings > Security > Browser History > [Delete]
Note limit of Firefox sessions for version 17.0 and higher
If the limited number of Firefox sessions is exceeded, it may no longer be possible to address the device
via the webConfig tool.
Do not use the refresh functions of the Internet browser:
[Shift] [F5] or [Shift] + mouse click
9.3
Short description of the webConfig tool
The menus and dialog boxes of the webConfig tool are intuitive to operate and provide texts and tool tips.
The start page of the webConfig tool displays the current process information.
9.3.1 Change operating mode
For configurations with the webConfig tool, you can switch between the following operating modes:
•
Process
The device is connected to the control or to the PC.
• The process communication to the control is activated.
• The switching inputs/outputs are activated.
• The image currently recorded by the code reader is displayed if the function was not deactivated
in the webConfig tool.
The webConfig tool is completely contained in the firmware of the device.
The pages and functions of the webConfig tool may appear and be displayed differently depend
-
ing on the firmware version.
