Leuze electronic BCL 21 SB Скачать руководство пользователя страница 31

Страница: 31 / 88

Installation

Leuze electronic

Technical description BCL 21/22 SB

TNT

35/7-2

Installation

6.1

Storage, Transportation

Attention!

When transporting, package the device so that it is protected against collision and humidity.
Optimal protection is achieved when using the original packaging. Heed the required
environmental conditions specified in the technical data.

Unpacking



Check the packaging for any damage. If damage is found, notify the post office or shipping
agent as well as the supplier.



Check the delivery contents using your order and the delivery papers:

• delivered quantity
• device type and model as indicated on the nameplate
• accessories
• operating manual

The name plate provides information as to what BCL type your device is. For specific
information, please refer to chapter 4.4.1.

Name plates, BCL-models

Figure 6.1:

Device name plate BCL 21/22



Save the original packaging for later storage or shipping.

If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.



Observe the applicable local regulations when disposing of the packaging materials.

Cleaning



Clean the glass window of the BCL 21/22 with a soft cloth before mounting. Remove all
packaging remains, e.g. carton fibers or Styrofoam balls.

Attention!

Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.

Содержание BCL 21 SB

























































































Результаты поиска

Содержание BCL 21 SB

Отзывы:

Похожие инструкции для BCL 21 SB

Бренды по названию

Популярные бренды

Leuze electronic BCL 21 SB, Техническое описание

Результаты поиска

Содержание BCL 21 SB

Отзывы:

Похожие инструкции для BCL 21 SB

Бренды по названию

Популярные бренды