Leuze electronic 50143561, Оригинальная инструкция по эксплуатации, Страница: 53 / 64

Leuze electronic CMS 700i
– Contour Measurement System
Page 53
9.3 Error codes of all interface
Value Description Comment
000 Without any error System okay
001 General system error
002 General sensor error System has a sensor error
003 General communication error Communication disturbed or interrupted
004 General measurement error Last measurement not valid
005 .. 019 Reserved
020 Error length sensor General error length sensor
021 Communication error length
sensor Communication to length sensor disturbed
or interrupted
022 Length sensor cleaning Dirt on length sensor, cleaning required
023 .. 029 Reserved
030 Error width sensor General error width sensor
031 Communication error width
sensor Communication to width sensor disturbed or
interrupted
032 Width sensor cleaning Dirt on width sensor, cleaning required
033 .. 039 Reserved
040 Error height sensor General error height sensor
041 Communication error height
sensor Communication to height sensor disturbed
or interrupted
042 Height sensor cleaning Dirt on height sensor, cleaning required
043 .. 099 Reserved
100 Measurement dimension Last object was too small in
≥ 1 dimension
101 Measurement plausibility Raw data could not be evaluated correctly or
completely.
102 .. 255 Reserved