Letatwin MAX LM-550A/PC A11 страница 66 Скачать руководство пользователя

Страница: 66 / 69

8. TROUBLE SHOOTING

8-2 TROUBLESHOOTING

Problem

Countermeasure

1. The power is on but:

1) The screen does not turn on.
2) The screen is dark (or too

light)



Make sure that the plug and the power cord is securely

connected to the wall socket, the adapter and the LM-550E.



The optimum screen brightness depends on the ambient

temperature. Adjust it in OPTION menu.

2. When printing on the tube:

1)  Does not print.
2)  The printing is blur (weak).
3)  Prints sporadically.

4) The printing is stained (too

dense).

5) The tube is shorter than the

setting.

The characters don’t come
to the center.

7) The tube is jammed.

8) The white horizontal line is

on the printed characters.



Make sure that the cassette cover has been securely closed.



Make sure that the tube has been set properly.



Make sure that the tube diameter is correct.



Make sure that the ink ribbon has been set properly.



Make sure that there is no dirt, stain, etc adhered to the tube.



Make sure that there is no dirt, stain, etc adhered to the

thermal head.



If the ambient temperature becomes lower than 15

℃

higher than 35

℃

, printing faults may occur.

Note:

● Try adjusting “

PRINTING DENSITY

” in OPTION menu.

● When under the low temperature, by making the printing

speed the “

LOW TEMP. MODE (10.0mm/s)

,” the printing

quality might be slightly improved.



Check that the tube is not tangled to the reel. Set the tube in

a way that it can be taken out from tube reel with slight force
(approx. 200g).



Check that the tube has not been set twisted.



Check that the feeding roller is clean.



Check that there is no waste of the tube caught in the exit.



Remove the jammed tube wi

th using “FEED” function.

Do not pull the tube by hand.

● The printer head might be damaged. Contact your dealer.

Note:

● Don’t use the tube attached solid dirt or foreign material

because it may cause trouble of printer head.

Содержание MAX LM-550A/PC A11






































































Результаты поиска

Содержание MAX LM-550A/PC A11

Отзывы:

Похожие инструкции для MAX LM-550A/PC A11

Бренды по названию

Популярные бренды

Letatwin MAX LM-550A/PC A11, Инструкция по эксплуатации

Результаты поиска

Содержание MAX LM-550A/PC A11

Отзывы:

Похожие инструкции для MAX LM-550A/PC A11

Бренды по названию

Популярные бренды