VANITY SET:
LV11-24
5
VANITY C VANITY TOP + MIRROR
INSTALLATION STEPS
MIRROR INSTALLATION
Using a tape measure find a length of the vanity
ttop and divide it by 2. The result of the division
will be a center of the top. Using a tape measure
find the center of the top and mark a dot on the
wall just right above theb top using a pencil.
Using a level tool find a location of a second dot
to draw a vertical line that will serve as
installation center for the Vanity.
Measure the distance between installation
brackets of the Vanity and divide it by 2. The
result of the division will be a distance between
the drawn center line and center of a drilled
holes. Mark a center of the first hole and using a
level find and mark a location for a second
hole.Using an electric drill make the holes.
See Figure
See Figure
1
2
Apply a silicone inside each hole. Insert wall
anchors (a hammer may be needed if the holes
are too tight.) Two people lift the vanity and let
the two holes align(wall anchors and the brackets
hole on vanity)Using a Philips Screwdriver insert
the mounting screws into the wall anchors.Make
sure that the vanity is secured safely on the wall.
IMPORTANT!
Using a stud finder locate wooden
studs. Screws for mounting vanity must be installed in
the wooden studs to support weight of the vanity.
Figure 1
Figure 2
WALL
WALL
WALL
WALL
www.lesscare.com
