www.lesscare.com
5
VANITY SET:
LV4
VANITY C VANITY TOP + MIRROR
INSTALLATION STEPS
INSTALL DOOR & DRAWER HANDLES
Attach turn the upside down
The holes for the vanity legs are
were already pre-installed on the
bottom of cabinet.
Screw the leg on the bottom.
See Figure 2
Figure 3
Figure 2
All LV4 vanity cabinets by LessCare® come
pre-assembled. All door and drawer handles
are installed from the inner side of the drawer
to avoid damage during transportation. Open
the drawers to install the handles. Unscrew
every handle and install them from the outer
side of the doors and drawers.
See Figure 1
Note:
It is highly recommended not to use
electric drill to avoid overtightening the screws
during handle installation.
Figure 1
VANITY CABINET ASSEMBLY
Prior to installation of the glass vanity top
you must apply a silicone layer by a
perimeter of the vanity base cabinet and
carefully lay down the vanity top on top of
the vanity cabinet.
See Figure 3
Note (single vanity sink cabinet installation):
Vanity top is slightly wider than the actual
cabinet. Make sure that outstanding edges
are equal at left and right sides.
Apply a silicone layer on the back side of
the vanity top that will be adjacent to the
wall.Allow the silicone dry for 48 hours
prior to the first use of the vanity cabinet.
