Tools required:
Phillips screwdriver, Allen wrench (included in hardware pack).
Note:
These instructions are intended for various models and configurations. Your
product may not look exactly as shown in the diagrams.
Recommendation:
Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity:
These tables are not intended for use as seats.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomfield, CT
06002
Phone 860.243.3226
Fax 860.243.5392
www.lesro.com
1. Unpack and identify all parts. Note: Leg
frames are interchangeable – no left or
right.
2. Place the tabletop upside down on a
soft, clean surface to prevent scratches.
3. Attach one leg frame to tabletop using ¾”
Phillips bolts and washers into threaded
inserts, as shown in figure 1. Be sure
legs angle out. Keep bolts slightly loose
for now.
4. Connect cross tube to connecting post
on leg frame using ½” Allen bolt, as
shown in figure 2. Keep bolt slightly
loose for now.
5. Connect second leg frame to cross tube
and tabletop, as shown in figure 3.
6. Tighten all 18 bolts securely at this time.
7. Using 2 or more people, carefully flip
table to upright position. If you ordered
the optional shelf, please follow shelf
installation instructions on page 2. If you
did not order the shelf, your product is
now fully assembled and ready to use.
© 2011 Lesro Industries, Inc.
March 2011
Assembly Instructions
For Steel Frame Utility Tables
Parts List
Tabletop
Leg Frames, 2 pcs.
Cross Tube
Shelf (optional)
Figure 2
Figure 1
Hardware Pack
¾” Phillips Bolts, 16 pcs.
Washers, 16 pcs.
½” Allen Bolts, 2 pcs.
Allen Wrench
¾” Screws for Optional
Shelf
Figure 3
Legs
angle
out
Connecting Post
Cross
Tube
Table without Optional Shelf
