Tools required:
9/16” ratchet, Allen wrenches (included in hardware pack)
Note:
These instructions are intended for various models and configurations, with and without arms.
Your products may not look exactly as those shown in the diagrams.
Important
:
The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product remains strong and
stable for many years of use.
Weight Capacity:
All chairs in these series have a weight capacity of
275 lbs.
per seat, unless
otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Leaders in Reception Seating
Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Single Chairs
1. Unpack and identify all parts.
2. Connect lower cross tube between leg frames using 2”
Allen bolts as shown in figure 1. Keep these bolts loose
for now. (Leave about ¼” of exposed threads)
3. Connect back cross tube between leg frames using ½”
Allen bolts as shown in figures 1 and 2. Align holes and
insert bolts from front of chair. Tighten these 2 bolts
securely.
4. Tighten lower cross tube bolts from step 2 tightly. Before
doing so, make sure all four feet are sitting on a flat
surface and make sure overall frame assembly is not
leaning to one side or the other.
5. Attach seat cushion to back cushion using 3” hex bolts
and washers as shown in figure 3. Keep these bolts
loose for now.
6. Set cushion assembly into chair frame as shown in
figure 4. Align holes in frame with holes in seat cushion
and connect using 3” Allen bolts as shown in figure 5.
Tighten these bolts securely while making sure seat
cushion is centered between front legs tubes.
7. Tighten 3” hex bolts from step 5 securely at this time
while making sure back cushion is centered between
back leg tubes.
8. Your product is now assembled and ready to use.
© 2014 Lesro Industries, Inc.
May 2014
Figure 1
Figure 3
Figure 4
Figure 5
Back Cross
Tube
Right Leg
Frame
Lower
Cross Tube
Left Leg
Frame
Assembly Instructions
For Mystic Guest / Reception
Parts List
Leg Frames, left & right
Lower Cross Tube (1” dia)
Back Cross Tube (½” dia)
Seat Cushion
Back Cushion
Hardware Pack
2” Allen Bolts , 2 pcs.
½” Allen Bolts, 2 pcs.
3” Hex Bolts, 2 pcs.
Washers, 2 pcs.
3” Allen Bolts, 4 pcs.
Allen Wrenches, 2 pcs.
Figure 2
