Tools required:
Allen wrenches (included in hardware pack)
Note:
These instructions are intended for various models and configurations. Your
products may not look exactly as those shown in the diagrams.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product
remains strong and stable for many years of use.
Weight Capacity:
All guest chairs in this series have a weight capacity of
300 lbs
.
per
seat unless otherwise stated.
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
Visit us on-line at www.lesro.com
Seating the Way You Want It
Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002
Phone 860.243.3226
Fax 860.243.5392
www.lesro.com
© 2019 Lesro Industries, Inc.
Jan 2019
Assembly Instructions
For Gansett Guest and Oversize Chairs
Parts List
Leg Frame, Left
Leg Frame, Right
Back Support Bar
H-Frame Seat Support
Back Cushion
Seat Cushion
Hardware Pack
½” Allen Bolts , 4 pcs.
2” Allen Bolts, 6 pcs.
⅜ Allen Bolts, 2 pcs.
Small Allen Wrench
Large Allen Wrench
1. Unpack and identify all parts.
2. Place one of the leg frames on a table or
the floor, as shown in figure 1. Be sure
the surface is soft and clean to prevent
scratching. Connect the H-frame seat
support to the leg frame using 1/2” Allen
bolts. Keep bolts slightly loose.
3. Slide back support bar through slot in
back cushion, as shown in figure 2. Leave
equal lengths protruding from each end.
4. Connect back cushion to leg frame by
inserting back support bar into slot in leg
frame, as shown in figure 3. Secure using
3/8” Allen bolt. Keep bolt slightly loose.
5. Secure back cushion to H-frame using 2”
Allen bolts, as shown in figure 4. Keep
bolts slightly loose.
2” Allen
Bolts
Fig 4
(continued on page 2)
Fig 1
1/2” Allen Bolts
H-Frame
Seat
Support
Leg
Frame
Fig 2
Back
Support
Bar
Slot in back
cushion
Fig 3
3/8” Allen Bolt
Back
Support
Bar
Slot in Leg Frame
Back
Cushion
