Lepu Medical AIView 12V, Руководство оператора, Страница: 53 / 292

3-18
3.11.6 Selecting a Screen
The monitor enters the normal screen after it is powered on. The
normal screen is most frequently used for patient monitoring.
To select other screens, please refer to the following steps:
1. Access [Screen Selection] screen in either of the following
ways:

Press the [Screens] quick key
→
select the [Screen
Selection] tab.

Press[Main Menu]
→
[Screens], select the [Screen Selection]
tab.
2. Select the desired screen.
3.11.7 Configuring the Big Numerics Screen
To configure the big numerics screen, please refer to the following
steps:
1. Access [Screen Selection] screen in either of the following
ways:

Press the [Screens] quick key
→
select the [Screen
Selection] tab.

Press[Main Menu]
→
[Screens], select the [Screen Selection]
tab.
2. Select the [Big Numerics] option.
3. Select the [Big Numerics] tab.
4. Select a parameter numeric area or waveform area, and then
select an element to be displayed in this area from the popup
list.
3.11.8 Changing Parameter Colors
To set the color of measurement values and waveforms for each
parameter, please refer to the following steps:
1. Access [Parameters On/Off] screen in either of the following
ways:

Press the [Parameters] quick key.

Press[Main Menu]
→
[Parameters].
2. Select the [Parameter Color] tab and set the colors of
measurement values and waveforms for desired parameters.