Leonton EG2-0501-SFP Series, Руководство пользователя

Страница: 19 / 20

15
Hardware Installation
Installation Steps
This section will explain how to install EG2-0501-SFP series.
Installation Steps
Step 1.
Unpack the industrial Ethernet switch from the original packing box.
Step 2.
Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.

If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the DIN-Rail
Mounting section for DIN-Rail installation.

If you want to wall mount the industrial Ethernet switch, please refer to the Wall Mounting
section for wall mounting installation.
Step 3.
To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the Mounting
Installation section.
Step 4.
Power on the industrial Ethernet switch and then the power LED light will turn on.

If you need help on how to wire power, please refer to the Wiring the Power Inputs section.

Please refer to the LED Indicators section for LED light indication.
Step 5.
Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.
Step 6.
Insert one side of the RJ-45 cable into switch’s Ethernet port and on the other side into
the networking device’s Ethernet port, e.g. switch PC or server. The Ethernet port’s (RJ-45)
LED on the industrial Ethernet switch will turn on when the cable is connected to the
networking device.

Please refer to the LED Indicators section for LED light indication.
Step 7.
When all connections are set and the LED lights all show normal, the installation is
complete.