Mechanical installation
Transport equipment for gearbox
4
l
17
BA 12.0023−EN 6.0
4
Mechanical installation
}
Danger!
Only transport the drive with transport equipment or hoists which are suitable
for this load (see transport weights, chapter 3.2). Ensure a safe fixing. Avoid
shocks!
The motors attached to the gearbox are partially equipped with eyebolts.
These are
exclusively
determined for motor/gearbox mounting and
dismounting and must
not
be used for the complete geared motor!
4.1
Transport equipment for gearbox
As of size 05, Lenze GST, GKS and GSS gearboxes are as standard available with a transport
thread for eye bolts according to DIN 580. The thread position can be seen from the below
figures. The eye bolts are not contained in the delivery package.
GSTXX−1
GSTXX−2/3
GSSXX−2/3 and GKSXX−3/4
Fig. 1
Eye bolt position
)
Note!
As standard, threads are delivered with plug screws. The plug can be easily
removed, e.g. by using a screwdriver blade. For the thread size and load
carrying capacity of the eye bolt, please see Tab. 2.
