manualshive.com logo in svg

Lenze L-force 8400 Series, Справочное руководство, Страница: 29 / 1590

Поделиться
Скачать
Lenze L-force 8400 Series Скачать руководство пользователя страница 29

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23

29

2

Introduction: Parameterising the inverter

2.1

Integrated technology applications

 

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

2.1

Integrated technology applications

The following technology applications integrated in the inverter 8400 HighLine provide the main

signal flow for the implementation of a general or a special drive solution:

Technology application "Actuating drive speed"

This preset technology application serves to solve speed-controlled drive tasks, e.g.

conveyor drives (interconnected), extruders, test benches, vibrators, travelling drives,

presses, machining systems, metering units.

Technology application "actuating drive speed (AC Drive profile)"

This technology application available 

from version 13.00.00

 provides a speed and

torque control by means of "AC Drive Profile". The fieldbuses EtherNet/IP™ and

system bus (CANopen) are supported.

Technology application "Table positioning"

This technology application serves to solve position-controlled drive tasks which are

normally controlled by a higher-level control via a fieldbus, e.g. transport facilities,

rotary tables, storage and retrieval units, feed drives, metering units, hoists.

Note:

 An external sequence control is required for this TA!

"Switch-off positioning" technology application

This technology application available 

from version 04.00.00 

 is used to solve speed-

controlled drive tasks which require a pre-switch off or stopping at certain positions,

e.g. roller conveyors and conveying belts. The pre-switch off is implemented by

connecting switch-off sensors.

Note!

Please note that the "StateLine", "HighLine" and "TopLine" device types differ with regard 

to the number, functional range, and flexibility of the technology applications offered.

Detailed information on each technology application can be found in the main chapter 

entitled "

Technology applications

".

 (

372)

 

Содержание L-force 8400 Series























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов