Lenze IE2 g500-S, Инструкция по монтажу и включению

Страница: 56 / 76

Gearbox G50BS195 ... G50BS319
How to check the lubricant level:
1
.
Remove the control screw at the marked position.
4
Ventilation
^
22
2 .
Insert auxiliary tool through the threaded hole.
3
.
Carefully pull out the auxiliary tool and determine the lubricant level. The lubricant level
may be between the threaded hole and dimension "x".
4
.
If the lubricant level is too low, top up lubricant until the lubricant level is in the marked
area. If the loss is greater, determine the cause.
5
.
Insert the control screw and tighten it to the specified torque.
d2
G
x
ÖL
90°
A
B
C
A Check bore hole
B Auxiliary tool, e. g. angled wire (not included in the scope of supply)
C Control screw
Threaded hole G Screw head Filling height x
mm mm
M10 x 1 14 2
M12 x 1.5 17 3
M16 x 1.5 21 4
M20 x 1.5 25 5
G 1/8" 14 2.5
G 1/4" 18 3
G 3/8" 22 4
G 3/4" 32 7
Maintenance
Maintenance work
56