Lenze i510 protec, Инструкции по монтажу и включению

Страница: 28 / 59

Terminal data
Rated power P
rated
kW 0.37 ... 1.5 2.2
Connection description Mains connection
Connection X100
Connection type Pluggable
Max. cable cross-section mm² 4 6
Max. cable cross-section AWG 10 10
Stripping length mm 8 8
Stripping length in 0.3 0.3
Tightening torque Nm 0.6 0.7
Tightening torque lb-in 5.3 6.2
Required tool Screwdriver 0.5 x 3.0 Screwdriver 0.6 x 3.5
Rated power P
rated
kW 0.37 ... 2.2
Connection description PE connection
Connection PE
Max. cable cross-section mm² 6
Max. cable cross-section AWG 10
Stripping length mm 10
Stripping length in 0.4
Tightening torque Nm 2
Tightening torque lb-in 18
Required tool Torx key 20
Rated power P
rated
kW 0.37 ... 1.5 2.2
Connection description Motor connection
Connection X105
Connection type Pluggable
Max. cable cross-section mm² 4 6
Max. cable cross-section AWG 10 10
Stripping length mm 8 8
Stripping length in 0.3 0.3
Tightening torque Nm 0.6 0.7
Tightening torque lb-in 5.3 6.2
Required tool Screwdriver 0.5 x 3.0 Screwdriver 0.6 x 3.5
Fusing data
A residual current device (RCD) is optional.
Fusing data for UL/NEC compliant installations:
4
Fusing data
^
23
Inverter Fuse Circuit breaker RCD
Characteristic
Max. rated
current
Characteristic
Max. rated
current
Type
A A mA
I51AP137D gG/gL, gRL 40 B 32 ≥30 Typ B
I51AP175D gG/gL, gRL 40 B 32 ≥30 Typ B
I51AP211D gG/gL, gRL 40 B 32 ≥30 Typ B
I51AP215D gG/gL, gRL 40 B 32 ≥30 Typ B
I51AP222D gG/gL, gRL 40 B 32 ≥30 Typ B
Electrical installation
Mains connection
1-phase mains connection 230/240 V
28