manualshive.com logo in svg

Lenze i500 Series, Руководство по эксплуатации, Страница: 25 / 28

Поделиться
Скачать
Lenze i500 Series Скачать руководство пользователя страница 25

25

Troubleshooting

Operating instructions I510-Cabinet

8.3  Error codes

Error code

Description

Classification

Remedy

Blocking time 

[s]

Reset possible

2250

CiA: Continuous overcurrent (inside the device) Error

•  Check motor and wiring for short circuits.

•  Check brake resistor and wiring.

•  Check motor switching.

•  Check motor data settings.

5

Yes

2320

Short circuit or earth leakage on the motor side Error

•  Check motor cable.

•  Check length of motor cable.

•  Use shorter or lower-capacitance motor cable.

5

Yes

2340

CiA: Short circuit (inside the device)

Error

•  Check motor cable for short circuit.

5

Yes

2350

CiA: i²*t overload (thermal state)

Error

•  Check drive dimensions.

•  Check machine/driven mechanics for excessive load.

•  Check motor data settings.

•  Reduce values for slip compensation (

P315.01

, 

P315.02

) and oscillation damping (

P318.01

, 

P318.02

).

5

Yes

2382

Error: Device utilisation (Ixt) too high

Error

•  Check drive dimensions.

•  Reduce maximum overload current of the inverter (

P324.00

).

•  In case of high mass inertias, reduce maximum overload current of the inverter (

P324.00

) to 150 %.

3

Yes

2383

Warning: Device utilisation (Ixt) too high

Warning

•  Check drive dimensions.

0

Yes

3120

Mains phase fault

Error

•  Check mains connection wiring.

•  Check fuses.

0

Yes

3210

DC bus overvoltage

Error

•  Reduce dynamic performance of the load profile.

•  Check mains voltage.

•  Check settings for brake energy management.

•  Connect brake resistor to the power unit and activate the integrated brake chopper. (

P706.01

 = 0: brake 

resistance). 

0

Yes

3211

Warning: DC bus overvoltage

Warning

•  Reduce dynamic performance of the load profile.

•  Check mains voltage.

•  Check settings for brake energy management.

•  Connect brake resistor to the power unit and activate the integrated brake chopper. (

P706.01

 = 0: brake 

resistance). 

0

Yes

3220

DC bus undervoltage

Trouble

•  Check mains voltage.

•  Check fuses.

•  Check DC-bus voltage (

P105.00

).

•  Check mains settings.

0

Yes

3221

Warning: DC bus undervoltage

Warning

•  Check mains voltage.

•  Check fuses.

•  Check DC bus voltage.

•  Check mains settings.

0

Yes

3222

DC-bus voltage too low for switch-on

Warning

•  Check mains voltage.

•  Check fuses.

•  Check mains settings.

0

Yes

Содержание i500 Series





























Отзывы:

Нет отзывов