Lenze g350-B Series, Проектное планирование

Страница: 21 / 72

Safety instructions
Disregarding the following basic safety measures and safety information may lead to severe
personal injury and damage to property!
Observe all specifications of the corresponding documentation supplied. This is the precondi-
tion for safe and trouble-free operation and for obtaining the product features specified.
Please observe the specific safety information in the other sections!
Application as directed
•
The product must only be operated under the operating conditions prescribed in this docu-
mentation.
•
The product meets the protection requirements of 2014/35/EU: Low-Voltage Direc-
tive2014/35/EU: Low-Voltage Directive.
•
The product is not a machine in terms of 2006/42/EC: Machinery Directive2006/42/EC:
Machinery Directive.
•
Commissioning or starting the operation as directed of a machine with the product is not
permitted until it has been ensured that the machine meets the regulations of the EC Direc-
tive 2006/42/EC: Machinery Directive2006/42/EC: Machinery Directive; observe
EN 60204−1EN 60204−1.
•
Commissioning or starting the operation as directed is only allowed when there is compli-
ance with the EMC Directive 2014/30/EU2014/30/EU.
•
The harmonised standard EN 61800−5−1EN 61800−5−1 is used for the inverters.
•
The product is not a household appliance, but is only designed as component for commer-
cial or professional use in terms of EN 61000−3−2EN 61000−3−2.
•
The product can be used according to the technical data if drive systems have to comply
with categories according to EN 61800−3EN 61800−3.
In residential areas, the product may cause EMC interferences. The operator is responsible
for taking interference suppression measures.
•
The harmonised standard IEC/EN 60034 is used for the three-phase motors.
•
Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be influ-
enced can cause the brake torque to be reduced.
Project planning
Safety instructions
Application as directed
21