Lenze ECSDE012, Руководство по эксплуатации

Страница: 13 / 169

Safety instructions
General safety and application notes
2
13
EDBCSXE040 EN 6.0
2 Safety instructions
2.1 General safety and application notes for Lenze power supply modules
(acc. to Low−Voltage Directive 2006/95/EC)
For your personal safety
Depending on their degree of protection, Lenze power supply modules and their accessory
components can be live, moving and rotating during operation. Surfaces can be hot.
Non−authorised removal of the required cover, inappropriate use, incorrect installation or
operation, creates the risk of severe injury to persons or damage to material assets.
For more information please see the documentation.
High amounts of energy are produced in the power supply module. Therefore it is required
to wear personal protective equipment (body protection, headgear, eye protection, ear
protection, hand guard) when working with the power supply module.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364 and
CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national
regulations for the prevention of accidents must be observed).
According to this basic safety information, qualified, skilled personnel are persons who are
familiar with the assembly, installation, commissioning, and operation of the product and
who have the qualifications necessary for their occupation.
Application as directed
Power supply modules are components which are designed for installation in electrical
systems or machinery. They are not to be used as domestic appliances, but only for
industrial purposes according to EN 61000−3−2.
When installing the power supply modules in machines, commissioning (i.e. starting of
operation as directed) is prohibited until it is proven that the machine complies with the
regulations of the EC Directive 98/37/EC (Machinery Directive); EN 60204 must be
observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there is
compliance with the EMC Directive (89/336/EEC).
The power supply modules meet the requirements of the Low−Voltage Directive
73/23/EEC. The harmonised standard EN 61800−5−1 applies to the power supply modules.
The technical data as well as the supply conditions can be obtained from the nameplate
and the documentation. They must be strictly observed.
Warning: The power supply modules are products which can be installed in drive systems
of category C2 according to EN 61800−3. These products can cause radio interference in
residential areas. In this case, special measures can be necessary.
Transport, storage
Please observe the notes on transport, storage, and appropriate handling.
Observe the climatic conditions according to the technical data.