11
CMVPFB01A
Commissioning
4.3.4 Baud / Data Rate
P411 - Baud Rate
Default: N/A
Range: 0 - 10
Access: RO
Type: Integer
P411 = detected value
The SMV PROFIBUS-DP module automatically detects and synchronises to the data rate of the network to
which it has been connected. P411 displays a read only value that represents the detected data rate.
Table 4: Data Rates
P411 Value
Data Rate
0
Searching
1
9.6kbps
2
19.1kbps
3
45.45kbps
4
93.7kbps
5
187.5kbps
6
500kbps
7
1.5Mbps
8
3Mbps
9
6Mbps
10
12Mbps
4.3.5 Data Mapping
The SMV PROFIBUS-DP module has support for up to 6 cyclic data channels in both directions.
Cyclic data configuration is described in full in section 5.
The default mapping for SMV PROFIBUS-DP is 2 Data IN words and 2 Data OUT words, the configuration
is shown in Table 5.
Table 5: Default Mapped Cyclic Data
Data OUT Channel
Mapped Function
Data IN Channel
Mapped Function
0
Drive Control Word
0
Drive Status Word
1
Frequency Setpoint
1
Actual Output Frequency
NOTE
The terms “OUT data” and “IN data” describe the direction of data transfer as seen by the
PROFIBUS-DP network master controller.
•
•
•
