Lenze AC Tech ESVZAP0 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 49

background image

9

CMVPFB01A

Commissioning

4

Commissioning

4.1 Overview

It is assumed that the user has familiarised themselves with how to navigate through the drive parameters
using the keypad. Refer to the drive user manual for details.

The details that follow provide a step-by-step guide to quickly and easily set-up an SMV drive to
communicate on a PROFIBUS-DP fieldbus network, in a basic format. There are many more features and
settings available for the PROFIBUS-DP option module, for details on these refer to the fuller description in
the sections that follow.

NOTE

Details for configuring a specific network master are not provided herein because the method for
configuring master devices can differ greatly between manufacturers. However, a very basic generic
guide is provided.

4.2 Configuring the Network Master

4.2.1 Master Support Files

Most PROFIBUS-DP master configuration software utilises GSD files to configure the network profile and
communications with the relevant devices. GSD files are text files that contain information about the device
timings, features supported and available data formats for the PROFIBUS-DP device. Device icon files are
also supplied for use with the PROFIBUS-DP configuration software.

NOTE

Many manufacturers offer language-specific GSD files for their PROFIBUS-DP devices. In this case the
term and file suffix “GSD” is used for their primary/default language choice and additional files may
be available for alternative languages and will be named differently. For example, for manufacturers
where English is not the primary language it may be possible to obtain GSD and GSE files where the
GSD file is written in the native/home language and the GSE file will is written in English etc.

The SMV GSD files are available on the CD ROM that ships with the module and on the Lenze-AC Tech
website.

4.2.2 PROFIBUS-DP Master Setup Procedure

Details for configuring a specific network master are NOT provided herein. The method for configuring
master devices differs greatly between manufacturers. Provided herein is a very basic, generic guide to
setting up a network master.

Launch the Master configuration software.
Install/Import the required GSD support file(s) using the wizard tool if provided.
Setup master PROFIBUS-DP port with required cirteria such as node address and baudrate etc.
Add or “drag and drop” the required slave devices from the GSD library to the PROFIBUS-DP network
which is typically depicted on screen.
Configure the slave node address, ensuring that each node has a unique and individual address.
Configure each slave's I/O data size. (This is typically done by dragging and dropping the required
amount of modules from the GSD file library or picking the modules from a list).

1.
2.
3.
4.

5.
6.

«
...
13
14
15
16
17
...
»

Содержание ESVZAP0


















































Отзывы:

Нет отзывов

Похожие инструкции для ESVZAP0

Бренд: Parker Страницы: 30

Бренд: VAT Страницы: 22

Бренд: Danfoss Страницы: 85

VLT Decentral FCD 300

Бренд: Danfoss Страницы: 112

Бренд: Danfoss Страницы: 4

VLT 6000 series

Бренд: Danfoss Страницы: 27

Бренд: Danfoss Страницы: 16

Бренд: Danfoss Страницы: 20

ADAP-KOOL AK-PC 781

Бренд: Danfoss Страницы: 14

Бренд: Danfoss Страницы: 12

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 96

Бренд: Rane Страницы: 2

Бренд: U-Prox Страницы: 3

Бренд: Ultratec Страницы: 33

Бренд: Data Signs Страницы: 23

Бренд: Auber Страницы: 3

Бренд: Joy-it Страницы: 7

Бренд: Woodward Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды