31
E
4 Register another LH101-R
You can register up to four LH101-R to one LTM101 receiver and use
them simultaneously.
Two cases must be distinguished for registering another LH101-R to
an LTM101:
1. the LH101-R to be registered has never been connected to an
LTM101.
2. The LH101-R to be registered was already connected to another
LTM101.
Make sure that the LH101-R you want to register is
switched off.
4.1 Case 1: The LH101-R to be registered has never
been connected to an LTM101 before
•
Press the button on the LTM101 and keep it pressed
for approx. 3 seconds.
After these 3 seconds have elapsed, the LED on the
LTM101 starts flashing. The receiver will now search
for LH101-R units to be reconnected within one
minute.
•
Switch on the LH101-R within this minute. This will
now connect directly to the receiver.
•
As soon as the connection is made, the LED lights up
permanently.
You can now repeat this procedure 2 more times on this LTM101. In
this way, a total of 4 LH101-Rs are connected to one LTM101.
4.2 Case 2: The LH101-R to be registered was
already connected to another LTM101
•
Press the button on the LTM101 and keep it pressed
for approx. 3 seconds.
