CRV90
Instruc on Manual
Radio
1. Press the “ON/OFF” bu on to turn the clock radio on or off.
2. Press the “MODE” bu on to select radio band.
3. Adjust the “RADIO +” or “RADIO -“ to select the desired sta on.
4. Press the “VOL +” or “VOL -“ bu on to adjust the volume.
5. Press the “STORE / RECALL” bu on to store your desired sta on. The display will show the “P01”
means your sta on will be saved on the first pre-set. If it displays “P02” this means the sta on is
saved in the second pre-set.
6. To store the tuned sta on, press and hold the "STORE / RECALL" bu on un l the display shows
flashing “P01”. Under this condi on short press to confirm sta on to store in this memory loca on.
“P01” will stop to flash to feedback sta on is stored. Tuned another sta on and long press "STORE /
RECALL" bu on un l the display shows "P02" flashing then short press to confirm. Repeat this
procedure un l 10 memories are stored.
Please note you can only recall the preset sta on un l you save all 10 sta ons.
Se ng the Alarm
1. You must switch off the radio before you set the alarm me.
2. Press and hold the “ALARM ” bu on un l the Hour display begins to blink.
3. Now you can select to wake up by radio or buzzer or vibrator. The LED with bell logo stands for wake
up to buzzer or vibrator. The LED with music note logo stands for wake up to radio. Press “ALARM ”
bu on to select different wake up modes.
4. You can set the alarm me, a er you select the wake up mode. Press the “Hour” to adjust the hour
and press “Minute” bu on to adjust the Minute.
5. Press the “ALARM ” bu on now to fix the alarm me.
6. Remember plug in the “Vibrator Pad” at the rear of the product if you select wake up mode is Wake
by Vibrator.
Canceling the Daily Alarm
Press the “ALARM ” bu on to stop the alarm. The alarm will operate 24 hours later as per alarm Time
set.
Cancelling the Alarm
Press the “ALARM ” bu ons , the display will show “OFF” and all wake up mode
icons will also switch display off. The alarm se ng is cancelled now.
Se ng the Clock
1. You must switch off the radio before you set the clock me.
2. Press and hold the “ TIME” bu on un l the display begins to blink, then release the bu on.
3.Press the Hour and Minute bu on to adjust the hour and minute.
The PM indicator will light when the hour is set in the PM.
4. Press the “ TIME ” bu on to save me .
Se ng the Sleep Time
1. You must switch off the radio before you set the sleep me.
2. Press the Sleep bu on repeatedly to set the sleep me ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
Snooze and Alarm Reset
To use the snooze, press the SNOOZE bar when the alarm is sounding. The alarm will stop temporarily,
but will resume sounding a er 9 minutes.
NOTES
1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
2. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected
from the mains. As the disconnect devices is the mains plug of apparatus.
3. The mains plug of apparatus should not be obstructed OR should be easily accessed during
intended use.
4. Ba ery shall not be exposed to excessive heat such as sunshine, fire or the like.
5. Minimum distances 10cm around the apparatus for sufficient ven la ons.
6. The ven la on should not be impeded by covering the ven la on openings with items such as
newsapaper, table-cloths, curtains etc.
7. No naked flame sources such as lighted candles should be placed on the apparatus.
8. A en on should be drawn to the environmental aspects of ba ery disposal.
9. The use of apparatus in moderate climates.
S
PECIFICATIONS
Frequency Range: FM 88 –108 MHz
Power Source: AC100-240V ~ 50 Hz, 5W
Ba ery Back Up: 2 X AAA size ba eries (not included)
10. PM INDICATOR
11. AL BUZZER INDICATOR
12. AL RADIO INDICATOR
13. VIBRATOR INDICATOR
14. SLEEP FUNCTION INDICATOR
15. SPEAKER
16. VIBRATOR SOCKET
17. AC/DC SOCKET
18. BAT TERY COMPARTMENT
Lenoxx Electronics Aust Pty Ltd
www.lenoxx.com.au
Customer Service: 1300 666 848
1. RADIO ON/OFF
2. STORE/RECALL & TIME
3. SNOOZE & BRIGHTNESS
4. MIN/RADIO+
5. MODE
6. HOUR/RADIO-
7. SLEEP
8. VOL+
9. VOL-/AL
