43
Lenovo YOGA 900S-12ISK
1070 Speakers
For access, remove these FRUs in order:
• “1010 Base cover” on page 33
• “1020 Battery pack” on page 35
• “1030 PCI Express Mini Card for wireless LAN” on page 36
• “1050 System board” on page 39
• “1060 Heat sink assembly” on page 42
Figure 7. Removal steps of speakers
Release the cables from the cable guides in the direction shown by arrows.
Unplug connector
1
. Remove the screws
2
. Lift the speakers in the direction
shown by arrows
3
.
c
c
b
b
b
b
When installing:
Make sure that the connector is attached firmly.
Route the antenna cables along the cable guides. As you
route the cables, make sure that they are not subjected to
any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
Step Screw (quantity)
Color Torque
P/N
1
M2 × 2 mm, flat-head,
nylok-coated (4) speaker to upper
Black
1.5-2.0 kgf.cm
5S10K93857