Lenovo x3250 m6, Инструкция по установке и обслуживанию

Страница: 127 / 696

• When you restart the server, you are prompted to import the existing RAID configuration to the new
ServeRAID SAS/SATA controller.
Removing a ServeRAID SAS/SATA controller memory module
Note: For brevity, in this documentation the Lenovo ServeRAID SAS/SATA controller is often referred to as
the SAS/SATA adapter or the ServeRAID adapter.
To remove a ServeRAID adapter memory module, do the following:
Step 1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2. Remove the server cover. See “Removing the server cover” on page 88.
Step 3. Remove the PCI riser-card assembly. See “Removing the PCI riser-card assembly” on page 93.
Step 4. Remove the ServeRAID adapter. See “Removing an adapter” on page 110.
Step 5. Grasp the memory module and lift to remove it from the ServeRAID adapter.
Figure 45. ServeRAID adapter memory module removal
Step 6. Complete the parts replacement. See “Completing the parts replacement” on page 172.
Installing a ServeRAID SAS/SATA controller memory module
Note: For brevity, in this documentation the Lenovo ServeRAID SAS/SATA controller is often referred to as
the SAS/SATA adapter or the ServeRAID adapter.
To install a ServeRAID adapter memory module, do the following:
Step 1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2. Remove the server cover. See “Removing the server cover” on page 88.
Step 3. Remove the PCI riser-card assembly. See “Removing the PCI riser-card assembly” on page 93.
Step 4. Remove the ServeRAID adapter. See “Removing an adapter” on page 110.
Step 5. Touch the static-protective package that contains the memory module to any unpainted metal
surface on the server; then, remove the memory module from the package.
Chapter 7
.
Removing and installing server components
113