Rack installation instructions
Review the documentation that comes with the rack cabinet for safety and cabling information. Before
you install the server in a rack cabinet, review the following guidelines:
v
Two or more people are required to install devices 2U or larger in a rack cabinet.
v
One or more people are required to install devices 1U or larger in a rack cabinet.
v
Make sure that the room air temperature is below 40°C (104°F).
v
Do not block any air vents; usually 15 cm (6 in.) of space provides proper airflow.
v
Do not leave open spaces above or below an installed server in your rack cabinet. To help prevent
damage to server components, always install a blank filler panel to cover the open space and to help
ensure proper air circulation.
v
Install the server only in a rack cabinet with perforated doors.
v
Plan the device installation starting from the bottom of the rack cabinet.
v
Install the heaviest device in the bottom of the rack cabinet.
v
Always install the tip plates on the rack.
v
Do not extend more than one device out of the rack cabinet at the same time.
v
Remove the rack doors and side panels to provide easier access during installation.
v
Connect the server to a properly grounded outlet.
v
Do not overload the power outlet when you install multiple devices in the rack cabinet.
v
Install the server in a rack that meets the following requirements:
– Minimum depth of 70 mm (2.76 in.) between the front mounting flange and inside of the front door.
– Minimum depth of 157 mm (6.18 in.) between the rear mounting flange and inside of the rear door.
Use safe practices when lifting.
≥
18 kg (39.7 lb)
≥
32 kg (70.5 lb)
≥
55 kg (121.2 lb)
Do not place any objects on top of
rack-mounted devices.
Notes:
1.
When you install a 2U server, be sure to install the rails in the bottom U of the 2U area in the rack.
2.
Cage nuts and clip nuts may be required to install the server in a rack cabinet.
3.
Your server might look different from the servers that are illustrated, and some parts of the rack
installation kit might not be used.
