Lenovo tihnkserver rd330 Скачать руководство пользователя страница 22

Страница: 22 / 198

Microprocessor

One or two Intel

Xeon

quad-core, hexa-core, or octa-core microprocessors (internal cache size varies

by model)

For a list of the ThinkServer microprocessor options, go to:
http://www.lenovo.com/thinkserver

Memory

Your server has 12 memory slots. For more information, see “Memory module installation rules” on page 77.

Power supply

One or two 550-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS Gold)

Note:

If you are using uninterruptible power supplies (UPS), ensure that you use only pure-sine UPSes

with your ThinkServer server.

System fans

Your server comes with six system fans to provide proper system cooling and airflow.

Internal drives

Internal drives are devices that your server uses to read and store data. The internal drives supported
by your server vary by model.

• Hard disk drive

– Up to four 3.5-inch hot-swap Serial Advanced Technology Attachment (SATA) or Serial Attached SCSI

(SAS) hard disk drives (SCSI is the acronym for Small Computer System Interface)

– Up to six 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives

Note:

The term “2.5-inch hot-swap hard disk drives” or “2.5-inch hard disk drives” hereinafter refers to all

the supported types of 2.5-inch hard disk drives, including the solid-state drives.

• Optical drive

– One slim SATA optical drive in some models

For the location information about the internal drives or drive bays, see “Server components” on page 23.

Expansion slots

• Two riser card assembly slots on the system board

• One PCI Express card slot on the riser card assembly 1

• One PCI Express card slot on the riser card assembly 2

For detailed information, see “Rear view of the server” on page 21.

ThinkServer RD330 Hardware Maintenance Manual

Содержание tihnkserver rd330







































































































































































































Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды

Lenovo tihnkserver rd330, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды