Lenovo ThinsStation P320 Скачать руководство пользователя страница 199

Страница: 199 / 202

Appendix H. Trademarks

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo
The Lenovo logo
ThinkStation
The ThinkStation logo
ThinkVantage

Microsoft, Windows, and Windows Media are trademarks of the Microsoft group of companies.

Intel, Intel Xeon, Intel Core, Intel Pentium, and Thunderbolt are trademarks of Intel Corporation in the U.S.
and/or other countries.

Linux is a registered trademark of Linus Torvalds.

DisplayPort and Mini DisplayPort are trademarks of the Video Electronics Standards Association.

Ubuntu is a registered trademark of Canonical Ltd.

Other company, product, or service names may be trademarks or service marks of others.

191

Содержание ThinsStation P320











































































































































































































Результаты поиска

Содержание ThinsStation P320

Отзывы:

Lenovo ThinsStation P320, Руководство по техническому обслуживанию аппаратной части, Страница: 199 / 202

Результаты поиска

Содержание ThinsStation P320

Отзывы: