Chapter 2.
2-3
Adjusting your monitor image
This section describes the user control features for adjusting your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note:
The direct access controls are blue.
Input Change Switches the video input source
Brightness Direct access to Brightness adjustment
Image Setup Activates automatic image adjustment
Icon Control Description
Using the On-Screen Display (OSD) controls
To adiust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
to move among the icons. Select an icon and press
to access that function.
If there is a sub-menu, you can move between options using
or
, then press
to
select that function. Use
or
to make adjustments. Press
to save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the buttons
for 10 seconds to disable / enable DDC/CI function. The words " DDC/CI disable"
shows on the screen.
Table 2-1.
Direct access controls
Icon
Control
Description
Image Setup
Activates automatic image adjustment.
Brightness
Direct access to Brightness adjustment.
Input Change
Switches the video input source.
Содержание ThinkVision 9220-HB1
Страница 1: ...L201p Flat Panel Monitor User s Guide ...
