Lenovo ThinkSystem ST550, Руководство по установке

Страница: 82 / 136

Install the expansion drive cage
Use this information to install the expansion drive cage.
“ Read the
installation
Guidelines” on
page 58
“ Power off
the server for
this task” on
page 109
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 59
Before installing the expansion drive cage:
1. Fan 3 is required after the expansion drive cage is installed. If your server does not come with Fan 3,
purchase the front fan option before you install the expansion drive cage.
Note: The front fan option name is ThinkSystem ST550 Front Mid Fan Module for 4x2.5" ODD
Conversion.
2. If there is a filler installed in the bay, remove it. Keep the filler in a safe place for future use.
3. Touch the static-protective package that contains the new expansion drive cage to any unpainted
surface on the outside of the server. Then, take the new expansion drive cage out of the package and
place it on a static-protective surface.
To install the expansion drive cage, complete the following step:
Figure 42. Expansion drive cage installation
Step 1. Slide it into the bay until it snaps into position.
78
ThinkSystem ST550 Setup Guide